dimanche 25 septembre 2011


Here are the electronics components we used:

.1 transistor 2N2222
.1 resistor 1ko
.2 resistor 100ko
.1 diode 1N4004
.1 static relay Sharp S216S02
.1 74HC00N
.1 capacitor 100n
.2 capacitor 10p
.1 capacitor 150p (NP0 type)
.1 self radial 10uH

The 1T relay you see in the center of the picture was then replaced by a static one

Here is the website for the Printed Circuit (Bordeaux - France):
As cheap as fast.

Send us a mail if you need the Phototool

Here it goes, ready to be plugged directly on the Arduino.

Aucun commentaire:

Enregistrer un commentaire